不鏽鋼新聞

不鏽鋼加工新聞

您當前的位置:主頁 > 不鏽鋼新聞 > 不鏽鋼加工新聞 >

不鏽鋼加工過程中的注意事項

發布日期:2015-12-05 瀏覽次數:文章來源:未知 作者:北京不鏽鋼

導讀: 北京AG平台不鏽鋼製品廠是一家專門生產和銷售不鏽鋼加工的廠家,主營業務:北京不鏽鋼製品加工、北京非標加工、北京鐵製品加工、北京不鏽鋼製品。

     北京AG平台不鏽鋼製品廠是一家專門生產和銷售不鏽鋼加工的廠家,主營業務:北京不鏽鋼製品加工、北京非標加工、北京鐵製品加工、北京不鏽鋼製品。下麵北京不鏽鋼製品加工為您分享下不鏽鋼加工的過程中應注意的問題:
      其實對於不鏽鋼的加工,不少城市都有這樣的加工中心或者是專門的加工工廠,但是選擇不同的加工方,所得到的產品的效果是不一樣的,有的經驗比較足,師傅的技術能力比較強,因而加工出來的效果是能夠令人滿意的,但是也有一些加工工廠對於不鏽鋼產品的加工經驗比較缺乏,難以令人滿意,如此不但是浪費了時間,同時也是浪費了材料和金錢。因此,對於加工不鏽鋼產品,要注意的是要選擇好的加工廠家,在選擇之前除了溝通和交流之外,還需要看對方的實力如何,如若沒有成套的加工設備或者是熟練的工人,那麽是很難把不鏽鋼加工好的。

具體常見的注意事項:
  1.因為在加工的過程中刀具表麵與其他非金屬或者金屬結合成合金,使刀具更加容易生鏽,我覺得可以給他加個防氧化膜或者抗氧化膜。
  2.在不鏽鋼焊接中應該注意焊機電流的調節大小。
  3.冷卻液應該用水溶性切削液,半合成的,冷卻、潤滑都好。
  4.不鏽鋼雖然硬但是它也棉,就是軟的意思。上述的車法都會攪刀.要不鏽鋼加工車刀要磨好.車刀正角要大於5這樣子吃刀量可以打好多,效率會高出來.一般持刀單邊3MM。
  5.因為不鏽鋼容易變形,鑽孔和攻螺紋很是困難,所以要防止過熱,在加工麵噴油。
  6.不鏽鋼加工轉速應該慢點,進給率慢點,一般線速不超過130。
       7.車床不鏽鋼加工設和用YT8的車道。

    另外,加工不鏽鋼也是要考慮到成本的問題,很多產品其實都是比較難一次性的成型的,因而在加工之前就需要考慮到材料的消耗問題,這個除了需要多準備一些鋼材之外,在加工預算方麵也是要充足一些,以免因為預算的問題而導致加工工作的不順利。不過總得來說,加工不鏽鋼選擇好的加工廠家是很重要的,它可以為你呈現一個令你滿意的產品外形,同時也可以提高效率,這一點很重要。
   一、製品類 :承製簡潔繁雜的多元化製品和造型各異的多樣化鈑金加工。如,不鏽鋼工作台,高檔不鏽鋼酒店用品、家具家私、不鏽鋼花盆、不鏽鋼消毒設備、不鏽鋼配電箱、不鏽鋼推車、不鏽鋼垃圾箱、不鏽鋼家具製品等製品。
   二、加工類:數控機床(刨、剪、折、衝)高精度機加工業務。

  通過以上介紹的,希望能大家能夠在以後的加工過程中能夠注意以上的問題,北京AG平台不鏽鋼加工廠真誠的歡迎大家來AG平台廠考察。文章來源:(http://www.justgoshop.net)

Beijing Yi Feng Yuan Da stainless steel products factory is a specialized production and sales of stainless steel processing factory, the main business: Beijing stainless steel products processing, Beijing non standard processing, Beijing iron products processing, Beijing stainless steel products. Beijing stainless steel products processing for you to share in the process of stainless steel processing should pay attention to the problem:
In fact, for the stainless steel, many cities have such a machining center or specialized processing plants, but choose different processing, the effect of the product is not the same, some experience is relatively strong, so the effect is satisfactory, but there are some processing plants for stainless steel products processing experience is relatively lack, so not satisfactory, but also a waste of time, but also a waste of material and money. Therefore, for the processing of stainless steel products, it is to pay attention to choose a good processing factory, in addition to communication and communication, but also need to see how the strength of the other side, if not complete sets of processing equipment or skilled workers, then it is difficult to add stainless steel.
Specific attention matters:
1 because in the process of machining the surface of the tool and other non metal or metal into the alloy, so that the tool is more prone to rust, I think you can give him an anti oxidation film or anti oxidation film.
2 in the welding of stainless steel should pay attention to the size of the welding current.
3 coolant should be dissolved in water, semi synthetic, cooling, lubrication is good.
4 stainless steel although hard but it also cotton, that is, the meaning of soft. The car will be mixing blade. Stainless steel processing tool to wear well. Turning angle is greater than 5 like this depth can play a lot of, efficiency will be higher. General to unilateral knife 3mm.
5 because the stainless steel is easy to deformation, drilling and tapping is difficult, so to prevent overheating in the process of injection.
6 stainless steel processing speed should slow down, slow down the feed rate, the general speed of not more than 130.
7 lathe stainless steel processing and YT8 of the drive.
In addition, the processing of stainless steel is also to take into account the cost of the problem, many products are actually more difficult one time, so in the process before the need to consider the material consumption, this in addition to the need to prepare some of the steel, in the processing of the budget is also to be adequate, so as not to cause the problem caused by the processing work is not smooth. But generally speaking, the processing of stainless steel selection of good processing factory is very important, it can be for you to present a satisfactory product appearance, but also can improve the efficiency, this is very important.
A variety of products: sheet metal processing, manufacturing complex products and simple diversification of different shapes. For example, stainless steel table, high-grade stainless steel hotel supplies, furniture, stainless steel pot, stainless steel sterilizing equipment, stainless steel distribution box, stainless steel cart, stainless steel bins, stainless steel furniture products and other products.
Two, processing type: numerical control machine tool (plane, cutting, folding, punching) high precision machining business.
Through the above introduction, hope to everyone can process in the future to pay attention to the above problems, Beijing Yi Feng Yuan Da stainless steel processing factory sincerely welcome to visit our factory.

熱點推薦

  • 不鏽鋼廣告牌-2
  • 不鏽鋼樓梯扶手-1
  • 不鏽鋼感應門3
  • 不鏽鋼廣告牌-2
  • 不鏽鋼感應門2
  • 不鏽鋼廣告牌-3
  • 相關閱讀

  • 不鏽鋼加工產品容易變形怎麽辦
  • 北京AG平台不鏽鋼加工廠開工了,歡迎來點
  • 北京不鏽鋼加工廠中不鏽鋼常見的焊接方式
  • 影響不鏽鋼加工產品表麵質量的主要因素
  • AG平台不鏽鋼加工廠最新增加激光切割加工
  • 不鏽鋼加工廠在產品加工的時候注意事項
  • 不鏽鋼新聞   NEWS
    聯係AG平台   Contact Us