不鏽鋼新聞

不鏽鋼加工新聞

您當前的位置:主頁 > 不鏽鋼新聞 > 不鏽鋼加工新聞 >

不鏽鋼加工產品容易變形怎麽辦

發布日期:2018-10-06 瀏覽次數:文章來源:未知 作者:北京不鏽鋼

導讀:不鏽鋼加工產品容易變形怎麽辦 不鏽鋼加工容易變形,該怎麽辦呢?下麵北京AG平台不鏽鋼加工廠家來為您簡單介紹一下吧。 不鏽鋼在加工時肯定是會因為加工應力產生變形的,因此加工過程中,通過合理的加工工藝,如選擇合理的加工順序,一次加工量等,去控製

  不鏽鋼加工產品容易變形怎麽辦

  不鏽鋼加工容易變形,該怎麽辦呢?下麵北京AG平台不鏽鋼加工廠家來為您簡單介紹一下吧。

   不鏽鋼在加工時肯定是會因為加工應力產生變形的,因此加工過程中,通過合理的加工工藝,如選擇合理的加工順序,一次加工量等,去控製這個加工變形的。具體還是要根據不鏽鋼材質和零件本身結構去確定這個加工工藝的。對於焊接變形,則需要采用合理的焊接工藝,斷續焊,分段施焊,控製焊接熱輸入等方式進行控製,必要時剛性固定,或者加回火去除應力。

  不鏽鋼加工容易變形,是較為常見的一個問題,可能是設備不先進造成的,還可能是溫度控製不佳,或是切削力量大小掌握不到位等引起的,所以在具體操作的時候,一定要嚴格遵照相關的規定來進行了,從而將問題減少出現。盡管容易變形,但是不少廠家通過努力已經克服了這些問題出現,呈現給大家的不鏽鋼產品還是非常不錯的。文章來源(http://www.justgoshop.net)
  How to make stainless steel products easily deformed?
Stainless steel is easy to deform. What should we do? Next, Beijing Yifeng Yuan Da stainless steel processing factory will give you a brief introduction.
Stainless steel will certainly be deformed due to the processing stress, so in the process of processing, through a reasonable processing technology, such as the selection of a reasonable processing sequence, 1.
Second, to control the deformation of the process. Specifically, the processing technology should be determined according to the structure of stainless steel and parts themselves. For welding deformation,
It is necessary to adopt reasonable welding process, intermittent welding, sectional welding, control of welding heat input and other ways to control, if necessary, rigid fixed, or add tempering to remove stress.
Stainless steel processing is easy to deform, is a more common problem, may be caused by poor equipment, may also be poor temperature control, or the size of the cutting force control.
Not in place and so on causes, therefore in the concrete operation time, must strictly comply with the related stipulation to carry on, thus reduces the question to appear. Although it is easy to deform,
Many manufacturers have overcome these problems through their efforts, and the stainless steel products presented to you are still very good.
 

熱點推薦

  • 不鏽鋼廣告牌-2
  • 不鏽鋼樓梯扶手-1
  • 不鏽鋼感應門3
  • 不鏽鋼廣告牌-2
  • 不鏽鋼感應門2
  • 不鏽鋼廣告牌-3
  • 相關閱讀

  • 不鏽鋼加工產品容易變形怎麽辦
  • 北京AG平台不鏽鋼加工廠開工了,歡迎來點
  • 北京不鏽鋼加工廠中不鏽鋼常見的焊接方式
  • 影響不鏽鋼加工產品表麵質量的主要因素
  • AG平台不鏽鋼加工廠最新增加激光切割加工
  • 不鏽鋼加工廠在產品加工的時候注意事項
  • 不鏽鋼新聞   NEWS
    聯係AG平台   Contact Us